|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Global Mixed-mode Technology Inc. G1224 Dual Rail-to-Rail I/O, High-Slew-Rate OP Amp Features +3V to +5.5V Single-Supply Operation Input / Output Rail-to-Rail Low input current High output driving capacity Low Quiescent Current: 1mA @ 5V High Slew rate 6.5V/s High Gain-Bandwidth Product 6.5MHz High Open Loop Gain 95dB High PSRR 70dB General Description G1224 is a input/output rail-to-rail Operational Amplifier. It can be operated from +3V to +5.5V single supply or from 1.5V to 2.75 dual supply. G1224 can drive 66mA into resistor loads to within 10% power rail each amplifier. AC performance is very excellent with 6.5MHz bandwidth, 6.5V/s Slew Rate, 95dB open loop gain, 60 degree phase margin and low distortion. Supply current of G1224 is only 500A per Amplifier. It is very suitable for low current consumption applications to control high current loads. Applications include audio amplification for computers, sound ports, sound cards and set-top boxes. G1224 is available in 8pins SOP8, MSOP 8. Applications Headphone Driver Portable Equipment Battery-Powered Equipment Multimedia Audio ASIC Input or Output Amplifier Sensor Amplifier Low Power/Low Voltage Applications Ordering Information PART NUMBER G1224P1X G1224P8X MARKING G1224 G1224 TEMP. RANGE 0C to 85C 0C to 85C PINPACKAGE SOP 8L MSOP 8L Note: X Specify the packing type U: Tape & Reel T: Tube Pin Configuration Typical Application Circuit G1224 OUTA INAINA+ VSS 1 2 3 4 + 8 7 6 5 + VDD OUTB INBINB+ INA+ 3 VDD 8 + 2- G1224 4 1 RL 2K OUTA 8Pin SOP/MSOP Ver: 1.0 Feb 25, 2003 TEL: 886-3-5788833 http://www.gmt.com.tw 1 Global Mixed-mode Technology Inc. Absolute Maximum Ratings Supply Voltage (VDD to VSS)...............................6.5V All Other Pins......................(Vss-0.3V) to (VDD+0.3V) Continuous Power Dissipation (TA=25C) SOP 8......................................................520mW MSOP8.....................................................520mW G1224 JA...................................................240C/Watt Junction Temperature...................................150C Operating Temperature Range...............0C to 85C Storage Temperature Range..............-65C to 160C Lead Temperature (soldering, 10sec)...............260C Electrical Characteristics VDD = 5V; VSS = 0V; Tamb = 25C; CL=10pF, RL=1k to VDD/2; unless otherwise specified. PARAMETER Supplies Supply Voltage Range Supply Current Total Power Dissipation DC Characteristics Input Offset Voltage Common Mode Voltage Input Bias Current Input Bias Current Offset Input Resistance Open Loop Gain Maximum Output Current Output Voltage Swing High Output Voltage Swing Low Power Supply Rejection Ratio Common-Mode Rejection Ratio AC Characteristics Gain-Bandwidth Product Slew-Rate Phase Margin Maximum Output Current with THD Channel Separation SYMBOL VDD IDD Ptot VI (OS) VCM IB IOS RIN AV IO VOH VOL PSRR CMRR GBWP SR PM IO CS Note1 No load No load CONDITIONS MIN. 3 - TYP. MAX. 5.5 UNIT V mA mW mV V nA nA M dB mA V V dB dB MHz V/s 1 5 5 1.4 7 15 5 5 5 0.04 - Inferred from CMRR test 0 VOUT = VIN x 90% RL = 2k RL = 2k 3VVDD5.5V VSSVCMVDD Open-loop; No Load Measured from 10% to 90% of 4VP-P step, RL = 1k, CL = 10pF 85 55 4.96 50 50 - 1.5 1.5 1000 95 66 4.99 0.012 70 65 6.5 6.5 THD< 0.1%, RL = 16 f = 1KHz RL = 32 60 100 85 - deg mA dB Note1: Guaranteed by the Power-Supply Rejection Ratio (PSRR) test Ver: 1.0 Feb 25, 2003 TEL: 886-3-5788833 http://www.gmt.com.tw 2 Global Mixed-mode Technology Inc. Typical Performance Characteristics VDD = 5V; VSS = 0V; Tamb = 25C; CL=10pF, RL=1k to VDD/2; unless otherwise specified. G1224 Open Loop Gain & Phase Margin vs. Frequency 100 90 80 70 Gain(dB) 60 50 40 30 20 10 0 1.E-02 1.E-01 1.E+00 1.E+01 1.E+02 1.E+03 PSRR vs. Frequency 225 Gain 180 Phase Margin( ) 135 90 45 0 1.E+04 80 PSRRPSRR (dB) 60 PSRR+ 40 Phase 20 1.E-01 1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 Frequency - kHz Frequency - kHz CMRR vs. Frequency 80 10 Total Harmonic Distortion Plus Noise vs.Output Power f=1kHz Av=1 THD+N(%) 1 60 CMRR (dB) 40 RL=32 0.1 RL=15 20 p=(Vrms)2/R 0 1 10 100 1000 Frequency - kHz 10000 0.01 5 25 45 65 85 105 125 Output Power (mW) Sinking Current vs. Vo - (VSS) 160 140 120 100 80 60 40 20 0 0.1 0.6 1.1 1.6 2.1 Sourcing Current vs. (VDD) - Vo 160 140 Sourcing Current(mA) 120 100 80 60 40 20 0 0.1 0.6 1.1 1.6 2.1 Sinking Current (mA) VDD=+5V VDD=+3V VDD=+5V VDD=+3V Vo - (VSS) (VDD) - Vo Ver: 1.0 Feb 25, 2003 TEL: 886-3-5788833 http://www.gmt.com.tw 3 Global Mixed-mode Technology Inc. Typical Performance Characteristics (Continued) Large Signal Transient Response G1224 Small Signal Transient Response Operation with Rail-to-Rail Input and Output Operation with Beyond-the Rail Input Ver: 1.0 Feb 25, 2003 TEL: 886-3-5788833 http://www.gmt.com.tw 4 Global Mixed-mode Technology Inc. Package Information C G1224 E H L D 7 (4X) A2 y B A1 A e SOP- 8L Package Note: 1. Package body sizes exclude mold flash and gate burrs 2. Dimension L is measured in gage plane 3. Tolerance 0.10mm unless otherwise specified 4. Controlling dimension is millimeter converted inch dimensions are not necessarily exact. 5. Followed from JEDEC MS-012 SYMBOL A A1 A2 B C D E e H L y MIN. 1.35 0.10 ----0.33 0.19 4.80 3.80 ----5.80 0.40 ----0 DIMENSION IN MM NOM. 1.60 ----1.45 ----------------1.27 ----------------- MAX. 1.75 0.25 ----0.51 0.25 5.00 4.00 ----6.20 1.27 0.10 8 MIN. 0.053 0.004 ----0.013 0.007 0.189 0.150 ----0.228 0.016 ----0 DIMENSION IN INCH NOM. 0.063 ----0.057 ----------------0.050 ----------------- MAX. 0.069 0.010 ----0.020 0.010 0.197 0.157 ----0.244 0.050 0.004 8 Ver: 1.0 Feb 25, 2003 TEL: 886-3-5788833 http://www.gmt.com.tw 5 Global Mixed-mode Technology Inc. C G1224 E1 E L D 7 (4X) A2 y b A1 A e MSOP-8L Package Note: 1. Package body sizes exclude mold flash and gate burrs 2. Dimension L is measured in gage plane 3. Tolerance 0.10mm unless otherwise specified 4. Controlling dimension is millimeter converted inch dimensions are not necessarily exact. 5. Followed from JEDEC MO-137 SYMBOL A A1 A2 b C D E E1 e L y MIN. 0.81 0.00 0.76 0.28 0.13 2.90 4.80 2.90 ----0.40 ----0 DIMENSION IN MM NOM. 1.02 ----0.86 0.30 0.15 3.00 4.90 3.00 0.65 0.53 --------- MAX. 1.22 0.20 0.97 0.38 0.23 3.10 5.00 3.10 ----0.66 0.10 6 MIN. 0.032 0.000 0.030 0.011 0.005 0.114 0.189 0.114 ----0.016 ----0 DIMENSION IN INCH NOM. 0.040 ----0.034 0.012 0.006 0.118 0.193 0.118 0.026 0.021 --------- MAX. 0.048 0.008 0.038 0.015 0.009 0.122 0.197 0.122 ----0.026 0.004 6 Taping Specification Feed Direction Typical SOP/MSOP Package Orientation GMT Inc. does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and GMT Inc. reserves the right at any time without notice to change said circuitry and specifications. Ver: 1.0 Feb 25, 2003 TEL: 886-3-5788833 http://www.gmt.com.tw 6 |
Price & Availability of G1224P8X |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |